Categories

Contact Us

Shahe City Zhengfang Armored Glass Production Factory

Add:Xifeng Village, West of Shahe City, Hebei, China 

Ph:+8613933710740

E-mail:saleslucy@zhengfangglasslid.com

Customized Glass Lid for Soup Pot,Glass Lid for Hot Pot, Glass Lid for Ceramic Pot Leading Manufacturer

Characteristics: 1 Excellent heat endurance: can withstand drastic temperature changes in course of various cooking; the temperature is 170ºC. 2 High Surface Hardness: 5 or 6 times of that of normal ones; hard to break; safe use. 3 Handsome Styling: high transparency; new pet of modern kitchen....

Send Inquiry

Product Details

Product 

C Type Glass Lid

Type

C

Size

12-36cm

Material

Float Glass

Color

Clear, Blue, Green, Brown

Glass thickness

4mm or 5mm

Rim 

S/S 201, 202, 304

Center hole

Single or Double

Air vent

With or Without


Characteristics:

1 Excellent heat endurance: can withstand drastic temperature changes in course of various cooking; the temperature is 170ºC.

2 High Surface Hardness: 5 or 6 times of that of normal ones; hard to break; safe use.

3 Handsome Styling: high transparency; new pet of modern kitchen.

Products Use:

T type and G type glass lids are usually used for fry pan ,stainless steel pot ,non stick pan and so on…

C type glass lid is almost used for soup pot,hot pot,ceramic pot and so on…

Packing Details:

1, Each glass lid lined with soft paper and suitable qty into carton.

2,According to the customer’s request .

Delivery Details : 

15 days after confirming the contract

 

1:high strengthen impacting

2.heat stabilization can reach 200 temperature

3.brightness on the surface

4.using float glass as material

5.hard to break,easy to use

 

Test for quality control:

1.Heat test: put the glass lid into oven at 200 °C for 60 minutes, remove immediately into water at room's temperature , the lid should not be broken or cracked.

2.Impact resistance test: drop the 225g ball from the height of 1.5 meter in free fall and impact on the lid at 1/3 radius, so after three times, damage or cracks are not allowed.

3.Pressure test:use 120 grit abrasive paper scraping on the back side of the lid for 15 times, then check after 24 hours,the lid should not be broken or cracked.

4.Dishwasher test: washed by the dishwasher for 50 times, the lid should not turn to be yellow or dark, and without loosing and deformation on the stainless steel rim.


If you are interested in customized glass lid for soup pot,glass lid for hot pot, glass lid for ceramic pot leading manufacturer, please be free to contact us. We are one of the largest manufacturers in China, equipped with a productive factory at your service. Welcome to wholesale our quality products made in China and enjoy our good service.

Inquiry